KRYPTONITE TIE RODS 1999-2006 GM 1500 6 LUG TRUCKS/SUVS
Fits:
1999-2006 Chevy 1500 Silverado
1999-2006 GMC 1500 Sierra
1999-2006 Chevy 1500 SUVs
(Sierra, Escalade, Avalanche, Suburban, Tahoe, Yukon. 4x4 Trucks ONLY)
Important Fitment Details:
KRTR12-FT:
Designed for trucks equipped with Lift Spindles that call for larger diameter tapers.
Will NOT fit on lifts that retain the OEM outer tie rod ends.
"THESE TIE RODS ONLY FIT CENTERLINK EQUIPPED 1/2 TON TRUCKS, THEY WILL NOT FIT YOUR TRUCK IF YOU HAVE A STEERING RACK ASSEMBLY"
Features:
- Heat treated chromoly nickel outer studs.
- Bulletproof, all steel inner ball sockets.
- Solid 1 1/4" Hexagon steel body.
- Left and Right hand jam nuts for the ultimate adjustability.
Description:
Tie Rod Bodies come Black powder Coated and Laser Engraved
Attention; With the installation of an oversized Tie Rod, modification or alteration of the sway bar end link may be required. Replacement end links available here.
Engineered exclusively for the extreme demands of today's Heavy Duty Truck to work with stock or modified suspension. Kryptonite Death Grip tie rods will fit any 1999- Early 2007 GM 1/2 Ton Truck Centerlink Steering equipped. These will not fit trucks equipped with a steering rack, commonly found on many 2wd trucks.
Using superior components and engineering, these tie rods easily outperform the competition.
This complete package includes Right, Left, Inner, & Outer tie rods for use on factory center link.
In recent laboratory strength tests we applied enough pulling pressure to rip apart the OEM, Aftermarket, and Kryptonite series tie rods. The OEM tie rods fail at 9000 pounds of pressure. The much larger diameter aftermarket tie rods designed to fit lifted suspension trucks, failed at 17000 pounds of pressure. Kryptonite tie rods held up to an incredible 21000 pounds of pressure before pulling apart.
All of our ball joints and rod ends come pre-greased with premium Chevron Ultra EP2 Grease and are ready to install. Servicing will be done every 7-10k miles. (A small amount of grease is needed per joint, do not over grease)
Instructions:
CLICK HERE FOR COMPLETE VEHICLE FITMENT INFORMATION
CLICK HERE FOR INSTALLATION INSTRUCTIONS
Warranty:
(Kryptonite No Fine Print Lifetime Warranty)
Kryptonite Steering & Suspension components are warrantied for life to their original purchaser. This warranty covers manufacturer defects, premature wear, or breakage. Race it, jump it, off‑road it, wreck it, lift it—we don’t care. If you can break it, we’ll replace it.
Your Kryptonite products must be purchased through an Authorized Dealer, and Warranty Registration completed within 90 days of purchase. Complete warranty details can be found [here].
Fits:
1999-2006 Chevy 1500 Silverado
1999-2006 GMC 1500 Sierra
1999-2006 Chevy 1500 SUVs
(Sierra, Escalade, Avalanche, Suburban, Tahoe, Yukon. 4x4 Trucks ONLY)
Important Fitment Details:
KRTR12-FT:
Designed for trucks equipped with Lift Spindles that call for larger diameter tapers.
Will NOT fit on lifts that retain the OEM outer tie rod ends.
"THESE TIE RODS ONLY FIT CENTERLINK EQUIPPED 1/2 TON TRUCKS, THEY WILL NOT FIT YOUR TRUCK IF YOU HAVE A STEERING RACK ASSEMBLY"
Features:
- Heat treated chromoly nickel outer studs.
- Bulletproof, all steel inner ball sockets.
- Solid 1 1/4" Hexagon steel body.
- Left and Right hand jam nuts for the ultimate adjustability.
Description:
Tie Rod Bodies come Black powder Coated and Laser Engraved
Attention; With the installation of an oversized Tie Rod, modification or alteration of the sway bar end link may be required. Replacement end links available here.
Engineered exclusively for the extreme demands of today's Heavy Duty Truck to work with stock or modified suspension. Kryptonite Death Grip tie rods will fit any 1999- Early 2007 GM 1/2 Ton Truck Centerlink Steering equipped. These will not fit trucks equipped with a steering rack, commonly found on many 2wd trucks.
Using superior components and engineering, these tie rods easily outperform the competition.
This complete package includes Right, Left, Inner, & Outer tie rods for use on factory center link.
In recent laboratory strength tests we applied enough pulling pressure to rip apart the OEM, Aftermarket, and Kryptonite series tie rods. The OEM tie rods fail at 9000 pounds of pressure. The much larger diameter aftermarket tie rods designed to fit lifted suspension trucks, failed at 17000 pounds of pressure. Kryptonite tie rods held up to an incredible 21000 pounds of pressure before pulling apart.
All of our ball joints and rod ends come pre-greased with premium Chevron Ultra EP2 Grease and are ready to install. Servicing will be done every 7-10k miles. (A small amount of grease is needed per joint, do not over grease)
Instructions:
CLICK HERE FOR COMPLETE VEHICLE FITMENT INFORMATION
CLICK HERE FOR INSTALLATION INSTRUCTIONS
Warranty:
(Kryptonite No Fine Print Lifetime Warranty)
Kryptonite Steering & Suspension components are warrantied for life to their original purchaser. This warranty covers manufacturer defects, premature wear, or breakage. Race it, jump it, off‑road it, wreck it, lift it—we don’t care. If you can break it, we’ll replace it.
Your Kryptonite products must be purchased through an Authorized Dealer, and Warranty Registration completed within 90 days of purchase. Complete warranty details can be found [here].
Description
Fits:
1999-2006 Chevy 1500 Silverado
1999-2006 GMC 1500 Sierra
1999-2006 Chevy 1500 SUVs
(Sierra, Escalade, Avalanche, Suburban, Tahoe, Yukon. 4x4 Trucks ONLY)
Important Fitment Details:
KRTR12-FT:
Designed for trucks equipped with Lift Spindles that call for larger diameter tapers.
Will NOT fit on lifts that retain the OEM outer tie rod ends.
"THESE TIE RODS ONLY FIT CENTERLINK EQUIPPED 1/2 TON TRUCKS, THEY WILL NOT FIT YOUR TRUCK IF YOU HAVE A STEERING RACK ASSEMBLY"
Features:
- Heat treated chromoly nickel outer studs.
- Bulletproof, all steel inner ball sockets.
- Solid 1 1/4" Hexagon steel body.
- Left and Right hand jam nuts for the ultimate adjustability.
Description:
Tie Rod Bodies come Black powder Coated and Laser Engraved
Attention; With the installation of an oversized Tie Rod, modification or alteration of the sway bar end link may be required. Replacement end links available here.
Engineered exclusively for the extreme demands of today's Heavy Duty Truck to work with stock or modified suspension. Kryptonite Death Grip tie rods will fit any 1999- Early 2007 GM 1/2 Ton Truck Centerlink Steering equipped. These will not fit trucks equipped with a steering rack, commonly found on many 2wd trucks.
Using superior components and engineering, these tie rods easily outperform the competition.
This complete package includes Right, Left, Inner, & Outer tie rods for use on factory center link.
In recent laboratory strength tests we applied enough pulling pressure to rip apart the OEM, Aftermarket, and Kryptonite series tie rods. The OEM tie rods fail at 9000 pounds of pressure. The much larger diameter aftermarket tie rods designed to fit lifted suspension trucks, failed at 17000 pounds of pressure. Kryptonite tie rods held up to an incredible 21000 pounds of pressure before pulling apart.
All of our ball joints and rod ends come pre-greased with premium Chevron Ultra EP2 Grease and are ready to install. Servicing will be done every 7-10k miles. (A small amount of grease is needed per joint, do not over grease)
Instructions:
CLICK HERE FOR COMPLETE VEHICLE FITMENT INFORMATION
CLICK HERE FOR INSTALLATION INSTRUCTIONS
Warranty:
(Kryptonite No Fine Print Lifetime Warranty)
Kryptonite Steering & Suspension components are warrantied for life to their original purchaser. This warranty covers manufacturer defects, premature wear, or breakage. Race it, jump it, off‑road it, wreck it, lift it—we don’t care. If you can break it, we’ll replace it.
Your Kryptonite products must be purchased through an Authorized Dealer, and Warranty Registration completed within 90 days of purchase. Complete warranty details can be found [here].
